Exit from DFU mode


#21

Try usbble 1 :slight_smile:


#22

Bluetooth does not turn on. Log below:

[15:05:31.552] log
[15:05:31.567] [009877-5820, USB, CLI] Logs enabled
[15:05:38.513] ble_state
[15:05:38.525] [016837-6960, USB, INFO] BLE_STATE: bluetooth_status_flag=disabled
[15:05:38.525] [016837-000, USB, INFO] BLE_STATE: forced_off=no
[15:05:38.527] [016837-000, USB, INFO] BLE_STATE: nrf52_connect_status=not_started
[15:05:38.528] [016837-000, USB, INFO] BLE_STATE: ble_enable_state=UNKNOWN
[15:05:38.528] [016837-000, USB, INFO] BLE_STATE: last_bcts_sent_at=0
[15:05:38.528] [016837-000, USB, INFO] BLE_STATE: last_msg_sent_at=0
[15:05:38.529] [016837-000, USB, INFO] BLE_STATE: last_msg_recvd_at=0
[15:05:38.529] [016837-000, USB, INFO] UUID type 0x00, srv handle 0x0000, conn handle 0x0000
[15:05:38.530] [016837-000, USB, INFO] BCTS char handles: value=0x0000, user_desc=0x0000, cccd=0x0000, sccd=0x0000
[15:05:38.531] [016837-000, USB, INFO] VATS char handles: value=0x0000, user_desc=0x0000, cccd=0x0000, sccd=0x0000
[15:05:38.531] [016837-000, USB, INFO] VATC char handles: value=0x0000, user_desc=0x0000, cccd=0x0000, sccd=0x0000
[15:05:38.532] [016837-000, USB, INFO] first handle=0x0000, last handle=0x0000
[15:05:38.532] [016837-000, USB, INFO] Current mtu 0, payload len 0, bcts enabled0
[15:05:45.112] usbble 1
[15:05:45.134] [023444-6607, USB, DEBUG] Forcing NRF connection off
[15:05:45.136] [023444-000, USB, CLI] BLEUSB:OK
[15:05:52.503] [030822-7378, TRX, DEBUG] Si4460 temperature=34
[15:05:52.510] [030822-000, TRX, DEBUG] RSSI[1]: avg=-121 dBm, last=-121 [min=-128, max=-113], num=16
[15:05:52.512] [030822-000, TRX, DEBUG] RSSI[25]: avg=-124 dBm, last=-123 [min=-129, max=-114], num=16
[15:05:52.514] [030822-000, TRX, DEBUG] RSSI[49]: avg=-85 dBm, last=-84 [min=-94, max=-74], num=16
[15:05:52.516] [030823-001, TRX, DEBUG] FSM: state=FSM_RX_AWAKE, stage=0
[15:05:52.518] [030827-004, TRX, DEBUG] FSM: state=FSM_RX_AWAKE, stage=0
[15:05:52.526] [030831-004, TRX, DEBUG] FSM: state=FSM_RX_AWAKE, stage=0
[15:05:52.528] [030835-004, TRX, DEBUG] FSM: state=FSM_RX_SLEEP, stage=0
[15:06:07.580] [045896-15061, TRX, INFO] INT PREAMBLE_DETECT (Ctrl chn=49)
[15:06:07.586] [045898-002, TRX, DEBUG] FSM: state=FSM_RX_SYNC, stage=0
[15:06:07.618] [045932-034, TRX, INFO] FSM: Timer Expired: FSM_RX_SYNC (pre=1, sync=0)
[15:06:07.621] [045933-001, TRX, DEBUG] FSM: state=FSM_RX_INIT, stage=0
[15:06:07.622] [045937-004, TRX, DEBUG] FSM: state=FSM_RX_AWAKE, stage=0
[15:06:07.627] [045941-004, TRX, DEBUG] FSM: state=FSM_RX_AWAKE, stage=0
[15:06:07.629] [045945-004, TRX, DEBUG] FSM: state=FSM_RX_AWAKE, stage=0
[15:06:07.647] [045949-004, TRX, DEBUG] FSM: state=FSM_RX_SLEEP, stage=0
[15:06:10.845] ble_state
[15:06:10.871] [049169-3220, USB, INFO] BLE_STATE: bluetooth_status_flag=disabled
[15:06:10.871] [049169-000, USB, INFO] BLE_STATE: forced_off=no
[15:06:10.873] [049169-000, USB, INFO] BLE_STATE: nrf52_connect_status=not_started
[15:06:10.874] [049169-000, USB, INFO] BLE_STATE: ble_enable_state=UNKNOWN
[15:06:10.874] [049169-000, USB, INFO] BLE_STATE: last_bcts_sent_at=0
[15:06:10.875] [049169-000, USB, INFO] BLE_STATE: last_msg_sent_at=0
[15:06:10.876] [049169-000, USB, INFO] BLE_STATE: last_msg_recvd_at=0
[15:06:10.877] [049169-000, USB, INFO] UUID type 0x00, srv handle 0x0000, conn handle 0x0000
[15:06:10.878] [049169-000, USB, INFO] BCTS char handles: value=0x0000, user_desc=0x0000, cccd=0x0000, sccd=0x0000
[15:06:10.878] [049169-000, USB, INFO] VATS char handles: value=0x0000, user_desc=0x0000, cccd=0x0000, sccd=0x0000
[15:06:10.879] [049169-000, USB, INFO] VATC char handles: value=0x0000, user_desc=0x0000, cccd=0x0000, sccd=0x0000
[15:06:10.880] [049169-000, USB, INFO] first handle=0x0000, last handle=0x0000
[15:06:10.881] [049169-000, USB, INFO] Current mtu 0, payload len 0, bcts enabled0


#23

Hello!

Do you have any other ideas for activating the bluetooth?